QSFP28-100G-SR4
NNQ-40G-02
QSFP+ 40G, 850nm, 100M, Multimode SR4
Short Description
QSFP+-40Gb/s SR4 300M DDM
Application
- 40GBASE-SR4 40G Ethernet
- Breakout to10GBASE-SR Ethernet
- Proprietary interconnections
Compliance
- QSFP+ MSA
- IEEE802.3ba
- SFF-8436
This NETRO NN-QSFP-40G-SR4 are designed for use in 40 Gigabit per second links over multimode fiber. They are compliant with the QSFP+ MSA and IEEE 802.3ba 40GBASE-SR4.Module-level digital diagnostic functions are available via an I2C interface, as specified by the QSFP+ MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.
Absolute Maximum Ratings
Parameter | Symbol | Min. | Typ. | Max. | Unit | Ref. |
Storage Temperature | TS | -40 |
| 85 | ºC |
|
Storage Ambient Humidity | HA | 5 |
| 95 | % |
|
Maximum Supply Voltage | VCC1, VCCTX, VCCRX | -0.5 |
| 3.6 | V |
|
Signal Input Voltage |
| Vcc-0.3 |
| Vcc+0.3 | V |
|
Receiver Damage Threshold |
| +3.4 |
|
| dBm |
|
Lead Soldering Temperature/Time | TSOLD |
|
| 260/10 | ºC/sec | 1 |
Lead Soldering Temperature/Time | TSOLD |
|
| 360/10 | ºC/sec | 2 |
Note:
- Suitable for wave soldering.
- Only for soldering by iron.
General Product Characteristics
Parameter | Value | Unit | Ref. |
Module Form Factor | QSFP+ |
|
|
Number of Lanes | 4 Tx and 4 Rx |
|
|
Maximum Aggregate Data Rate | 42.0 | Gb/s |
|
Maximum Data Rate per Lane | 10.5 | Gb/s | Higher bit rates may be supported. Please contact Inphilight |
Protocols Supported | Typical applications include 40G Ethernet, InfiniBand, Fiber Channel, SATA/SAS3 |
|
|
Management Interface | Serial, I2c-based,400kHz maximum frequency |
| As defined by the QSFP+ MSA |
Data Rate Specifications | Symbol | Min. | Typ. | Max. | Unit | Ref. |
Bit Rate per Lane | BR | 1062 |
| 10500 | Mb/s | 1 |
Bit Error Ratio | BER |
|
| 10-12 |
| 2 |
Link distance on OM3 MMF | D |
|
| 300 | meters | 3 |
Link distance on OM4 MMF | D |
|
| 400 | meters | 3 |
Notes:
- Compliant with 40G Ethernet. Compatible with 1/10 Gigabit Ethernet and 1/2/4/8/10G Fiber Channel.
- Tested with a PRBS 231-1 test pattern.
- Per 40GBASE-SR4, IEEE 802.3ba
Optical Characteristics
Parameter | Symbol | Min. | Typ. | Max. | Unit | Ref. |
Transmitter (per Lane) | ||||||
Average Output Power | POUT | -7.6 |
| 2.4 | dBm |
|
Transmit OMA per Lane | TxOMA | -5.6 |
| 3.0 | dBm | 1 |
Extinction Ratio | ER | 3.0 |
|
| dB |
|
Center Wavelength | λC | 840 | 850 | 860 | nm |
|
RMS Spectral Width | σ |
|
| 0.65 | nm |
|
Transmitter and Dispersion Penalty | TDP |
|
| 3.5 | dB |
|
Transmitter OFF Output Power | POff |
|
| -30 | dBm |
|
Relative Intensity Noise | RIN |
|
| -128 | dB/Hz |
|
Transmitter eye mask definition {X1, X2, X3, Y1, Y2, Y3} |
| 0.23,0.34,0.43,0.27,0.35,0.4 |
|
| ||
Receiver (per Lane) | ||||||
Input Optical Wavelength | λIN | 840 | 850 | 860 | nm |
|
Rx Sensitivity per lane | RSENS |
|
| -9.5 | dBm |
|
Input Saturation Power (Overload) | PSAT | +2.4 |
|
| dBm |
|
Receiver Reflectance | Rfl |
|
| -12 | dBm |
|
Loss of Signal Assert | PA | -30 |
|
| dBm |
|
Loss of Signal De-assert | PD |
|
| -12 | dBm |
|
LOS Hysteresis | PD – PA | 0.5 |
| 6 | dB |
|
- Multirate capability: 1.06Gb/s to 10.5Gb/s per channel
- Reliable VCSEL array technology
- Maximum link length of 300m on OM3 Multimode Fiber (MMF) and 400m ON OM4 MMF
- Hot-pluggable QSFP+ footprint
- Single 1×12 MPO receptacle
- Maximum power dissipation<1W
- Four-channel full-duplex transceiver module
- RoHS-6 compliant and lead-free
- Support Digital Diagnostic Monitor interface
- Unretired XLPPI electrical interface
- Case operating temperature Commercial: 0°C to +70°C